[S2000] Geometrie et specification

[Froggy]

je veux reffaire ma geometrie, et comme y a plusieurs specifications j'en fais un topic.

S2000 Original Wheel Alignment
Camber
Front -0 deg 30 min
Rear -1 deg 30 min

Caster
Front 6.0 deg

Total Toe
Front 0 mm
Rear In 6 mm (1/4 inch)

---------------------------------------------------------------------------------------------------
UK TSB Wheel Alignment Recommendations
Honda UK settings are published in degree/minutes and some machines take inputs in decimal degree which is translated by = sign.

Camber
Front -1 deg 00 min
Rear -2 deg 00 min

Caster
Front 6 deg 45 min = 6.75̊

Total Toe
Front 0 mm
Total Toe 0 deg 40 min (0 deg 20 min per side) = +0.32̊ (+0.16̊ per side)

Source: http://s2000quebec.frenchboard.com/t36- ... nt-uk-spec

D'autres infos?

[Marcotwint_tuga]

si tu veux je prends une photo de tous les degres des suspensions au garage,j'ai l'ordi Corgui pour les geo...